1Pa Adjustment
Easy Installation
Filter
Float Switch
1Pa Adjustment
It is possible to adjust the ESP setting via wired controller. And the precision of 1 Pa can give the most accurate ESP setting in class. * YXE-C01U1(E) is recommended to set the ESP parameter.(Parameter setting 17→10→from 1 to 250) Warning: The slim duct with the capacity of 7.0kW(24K Btu/h) has the max ESP 40Pa. If we have to install the duct unit with a long duct, we have to choose the MSP duct of 7.0kW(24K Btu/h).
Easy Installation
Air suction direction can be altered from rear suction to bottom suction. We can install it for free use or for connecting to suction grilles. * It is recommended to choose the rear suction because the noise from the rear suction is about 5 dB(A) lower than the bottom suction.
Filter
Hisense Duct units are all standard with nylon filter. The long-life filter can reduce the replacement and cleaning times. The filter is washable so that the dust can be easily washed off from the filter. *Long Service Life *Reduce The Replacement *Reduce Cleaning Times *Easy to Clean
Float Switch
The float switch can ensure the water always under the safety level, even if the pump failed or the drain is blocked. This is double insurance of no water leakage disaster. Hisense duct units are all standard with float switch. The drain pan of Hisense is big enough for containing all the water returned from the drain pipe in suddenly power off.
Slim Design
Slim duct unit, from 2.5kW to 7.0kW, have the height of only 190mm.
Влезте, или регистрирайте потребителски акаунт.